進口威格士電磁閥，DG4V-5-OBJ-VM-U-H6-20
Note: These charts are based on the inlet pressure being at
least 10,3 bar (150 psi) higher than the outlet reduced pressure.
注：本表作為在選擇合適的安裝螺栓長度模塊的各種組合的指南。之后，
電路開發和堆疊的組件是預定的，添加所需的長度加上20,6毫米（.81英寸）
螺紋嚙合的底板或集成塊。選擇適當?shù)挠⒅?br />螺紋的螺栓和order by的螺栓套件數量。所有的螺栓套件
包括六（6）內六角螺釘和六（6）防松墊圈4,4毫米（0.17英寸）厚。
使用兩個（2）螺栓是可選的。所有六
Scope An aid to commissioning specified Vickers proportional
valves, amplifiers and their applications. Checks and
measurements of their parameters can be made.
Measurement and/or command signal input sockets
進口威格士電磁閥，DG4V-5-OBJ-VM-U-H6-20
Connector for Vickers amplifier
Connector to machine electrics or Vickers proportional valves
110/130/220/240V (+10 to ?5%) AC 50/60 Hz (100 VA max.)
24V DC (40W max.) internally from AC/DC converter or
externally from application electrics. Panel-mounted
Panel-mounted switch. Internal or application source; LED
Digital voltmeter (DVM), 3.5-digit display. Panel-mounted.
Two-range timer offering selection of 0-1 or 0-10 sec ranges.
Two independent panel-mounted potentiometers with polarity
Three independent panel-mounted switches and output
44 x ?2 (0.0787 dia.) sockets, access to DIN 41612 F48
DIN 41612 F48 edge connector.
DIN 41612 F48 edge connector for flying leads.
Standard enclosure with carrying handle.
（6）螺栓被為140巴（2000 psi）的壓力210 bar的壓力范圍
（3000磅）的zui大密封的使用壽命。
疊加閥, 規格 3, ISO 4401-03; NFPA-D03; 315 bar
(4500 psi); 60 L/min (15.7 USgpm), DGMC
 D03, DGMX2 D03, DGMR D03 樣本 中文
疊加閥, 規格 5 (替換為 649 REV 11/97)", ISO 4401 -05
 規格, 315 bar (4500 psi) 和 120 l/min (32 USgp
m) 壓力溢流和減壓, 順序卸壓 樣本 中文
SystemStak™ 疊加閥：規格 7 （NG 16） 工業閥
   產品說明 樣本類型 PDF 樣本編號
DGM** 7, ISO 4401 規格 07; 315 bar (4500 p
si); 等于 200 L/min (53 USgpm) 疊加閥 (替換為 D-V-435,517,719,436)"